|
2310- Fitting Kit for HPLC Systems
Kit provides a complete package of fittings, PTFE tubing required to set up
several Mobile Phase Handling Systems.
| Article No. |
Description |
Price
(ea) |
|
| 2310 |
Kit, Complete |
122.00 |
|
Kit |
| Article No. |
Quantity |
Description |
| 2216-02 |
20 |
1/4-28 nuts for 1/8" OD
tubing |
| 2218-02 |
20 |
Ferrules for 1/8" OD tubing |
| 2240-02 |
10ft |
1/8" PTFE tubing |
| 2290-02 |
1 |
Adapter, Vacuum 1/4" ID w/
1/4-28 thread |
| 2220-02 |
1 |
Adapter 1/4-28 to 1/8" tubing
(for Water HPLC systems with 1/8" tubing) |
2220- Adapter, for Waters 1/8" ID PTFE Tubing
2290- Adapter, Vacuum
| Article No. |
Description |
Price
(ea) |
|
| 2220-02 |
Adapter, 1/4" ID PTFE Tubing |
6.95 |
| 2290-02 |
Adapter, 1/4" ID tubing with
1/4-28 thread |
7.20 |
2281- Four on-off valves (1) connects 47mm membrane filter to reservoir (2) pump
valve controls reservoir to HPLC pump (3) sparge valve connects filter in
reservoir to helium source. (4) vent/vacuum connects vacuum pump to
reservoir and is open for reservoir evacuation and helium sparging and closed
for helium blanketing. Valve body is glass filled PTFE and lower screw cap
is 45mm.
| Article No. |
O-Ring Type |
Price
(ea) |
|
| 2281-00 |
PTFE O-Rings |
390.00 |
| 2281-01 |
Chemraz O-Rings, THF Resistant |
510.00 |
2282- Five Valve Recycling Cap
Special cap has an additional valve incorporated in the filter valve that
allows continuous recycling of mobile phase.
| Article No. |
O-Ring Type |
Price
(ea) |
|
| 2282-00 |
PTFE O-Rings |
435.00 |
| 2282-01 |
Chemraz O-Rings, THF Resistant |
806.00 |
2267- Filtration / Degassing Cap
Glass filled PTFE construction with a quick turn cap to secure funnel or
solvent pick-up adapter. Supplied complete with fritted glass membrane
support.
| Article No. |
Filter Diameter |
Price
(ea) |
|
| 2267-00 |
47mm |
244.00 |
| 2267-90 |
90mm |
370.00 |
| 4102-52 |
47mm Stainless Steel Support |
93.60 |
| 4102-97 |
90mm Stainless Steel Support |
190.00 |
| 4102-55 |
47mm Fritted Glass Support |
23.40 |
| 4102-98 |
90mm Fritted Glass Support |
64.00 |
2268- Three Hole Delivery Cap
The three hole delivery cap has 3 holes with 1/4"-28 threads at the
top for use with 1/8" OD tubing. No need to precut tubing to
reach the reservoir bottom. Just a quick quarter turn of the lock nut
(from outside the reservoir) allows positioning of PTFE tubing at any
depth. Supplied with three special THF resistant 1/4"-28 solid
plugs.
| Article No. |
Price
(ea) |
|
| 2268-00 |
244.00 |
2286- Three Valve Cap
Cap has three independently operated on/off valves built in the
cap. All valves are THF resistant.
| Article No. |
O-Ring Compound |
Price
(ea) |
|
| 2286-00 |
PTFE O-Rings |
254.00 |
| 2286-01 |
Chemraz O-Rings THF Resistant |
395.00 |
2260- Mobile Phase Reservoir Only
NDS HPLC reservoirs are designed to maximize solvent withdraw and
mixing. The autoclavable Safety coating is standard. This coating
will protect light sensitive mobile phases up to 385nm. Top thread is a
heavy wall GL-45.
| Article No. |
Capacity (mL) |
Approx. OAL Diameter x Height (mm) |
Price
(ea) |
|
| 2260-02 |
250 |
75 x 115 |
68.00 |
| 2260-04 |
500 |
90 x 130 |
72.50 |
| 2260-06 |
1000 |
120 x 230 |
85.00 |
| 2260-08 |
2000 |
150 x 280 |
145.00 |
| 2260-10 |
5000 |
195 x 400 |
265.00 |
| 2260-12 |
10000 |
240 x 475 |
614.00 |
| 2260-14 |
20000 |
305 x 565 |
1019.00 |
2248- Stainless Steel Inlet Filter
Filters connect directly to 1/8" PTFE tubing. The diameter is
6mm, height 25mm.
| Article No. |
Description |
Price
(ea) |
|
| 2248-02 |
2 Micron Filter |
23.40 |
2249- Low Profile Biocompatible Inlet Filter
This special filter has filter cross section of 0.188" housed in a
(UHMWPE) body. Easily connects to 1/8" PTFE tubing. Mobile
phase is drawn up from bottom assuring maximum solvent use.
| Article No. |
Description |
Price
(ea) |
|
| 2249-00 |
10 micron filter, complete |
32.75 |
| 2249-02 |
Replacement Filters 10u... (5/pkg) |
30.75 |
2264- Mobile Phase Pickup Adapter
This all glass adapter is designed specifically for use with the four
valve Mobile Phase Filtration/Delivery cap system. Because there is no
need to purchase a solvent pickup adapter with a stopcock when using a four
valve system you can save the added expense. This adapter holds a
membrane filter securely in place while providing for continuous in-line
filtration of mobile phase. Supplied complete with PTFE connector and
3' of 1/4" PTFE tubing.
| Article No. |
Description |
Price
(ea) |
|
| 2264-00 |
47mm Mobile Phase Pick-up Adapter
w/o valve |
72.00 |
2266- Mobile Phase Pickup Adapter with valve
This all glass adapter is designed specifically for use with the f
Mobile Phase Filtration/Degassing cap and all #4106 - 4108 Filtration
Systems. This adapter holds a membrane filter securely in place while
providing for continuous in-line filtration of mobile phase. Supplied
complete with PTFE connector and 3' of 1/4" PTFE tubing.
| Article No. |
Description |
Price
(ea) |
|
| 2266-00 |
47mm Mobile Phase Pick-up Adapter
with valve |
105.00 |
| 2266-90 |
90mm Mobile Phase Pick-up Adapter
with valve |
148.00 |
2295- PTFE "Hi Vortex" Stirrer
These special PTFE stirrers are designed to provide maximum stirring of
mobile phase solvents with NDS mobile phase reservoirs.
| Article No. |
Diameter |
Reservoir Size (ml) |
Price
(ea) |
|
| 2295-02 |
19 x 19 |
250-500 |
18.45 |
| 2295-04 |
32 x 32 |
1000-20000 |
18.75 |
| 
